TTE1050 upgrade turbocharger for Mercedes AMG 4.0 TwinScroll
The TTE1050 hybrid turbochargers are the powerful expansion stage for the new generation of 4.0l V8 AMG models.

For the production of the TTE1050 upgrade turbochargers, TTE uses light, milled 7 + 7 compressor wheels. Not only are they larger than the standard parts, they are also equipped with the extended tip technology. They therefore convey significantly more air mass and still respond very early. The standard compressor housing is machined with a CNC milling machine so that it can accommodate the new wheel.

The turbine wheels are also clipped so that they can cope with the increased exhaust gas volume without generating excessive exhaust gas back pressure. The ends of the turbine blades are rounded to a certain contour, which increases the throughput, reduces the load on the turbine and thus reduces the exhaust gas back pressure.

The reinforced TTE axial bearing ensures a higher load capacity.


The extremely precise balance of every TTE turbocharger is a key element for longevity, sound and function, which is why TTE attaches great importance to this process. Each individual component is initially balanced at up to 2800 rpm in several levels. The trunk group is then assembled and dynamically balanced again in several levels at up to 250,000 rpm. At TTE, this process takes place on a VSR (Vibration Sortin Rig) balancing machine.Each turbocharger is supplied with a balancing protocol that you can clearly assign to your TTE charger using the serial number, and which you can trace at any time with which values ​​your turbocharger left the factory with.


- Original housing, processed by TTE
- Milled 7 + 7 aluminum compressors with modern contours
- Modified pressure cells
- TTE 9-blade turbine wheels
- Modified compressor housing with CNC milled inlet
- Optimized bearing and running clearances
- Reinforced 360 ° bearings
- Modified boost pressure control
- Fuselage groups in several levels, dynamically balanced, with protocol
- power of over 1050 hp possible
- installation in original position
- developed, produced and built by TTE

The price for the conversion of your series loader is only valid if a pair of operational, undamaged original loaders is sent. If the parts sent are not suitable for conversion, you will receive a cost estimate after dismantling.

The name of the turbocharger also indicates the maximum performance! As an example, a TTE350 creates approx. 350 HP and a TTE350 + a little more. Often, however, further modifications to the environment, i.e. engine, intake, AGA, etc. are necessary in order to achieve this performance target. Please contact us if you have any questions, we are happy to help.

The conversion is only possible with delivery of executable, original AMG63 loaders.

TTE1050 upgrade turbocharger for Mercedes AMG 4.0 TwinScroll

€ 3.718,00Prijs
excl. BTW